This is the original top of the line, American Made blue safety spot light.

Safety is paramount in the work place. Often times pedestrians and employees become distracted by paperwork, noise, music, phones or a host of other things while in the warehouse. If not distractions, then blind corners, crossing aisles, and loading docks. With forklifts moving about (especially electrics), this is a recipe for disaster.

Strobe lights and back-up alarms tend to get lost in the environment. Not blue spot lights, they literally stick out like a beacon. This light paints a blue dot about 6″ in diameter on the ground in front of or behind a piece of equipment as a vibrant visual aid. If a piece of equipment is coming from around a corner, the light will be there ahead of it giving warning to the pedestrian or other drivers.

We’ve been seeing more and more OSHA inspectors requiring the use of these lights in the workplace. Mounting is usually recommended on the rear of the overhead guard, but the front is becoming more and more popular as well.

• Long life LED (greater than 20,000 hour life expectancy)
• 9 Watt
• 12-48 volts, DC
• .18-.7A Current Draw
• 830+ LUX on Ground
• IP67 rated (suitable for power washing)
• Provides visual warning for pedestrians to promote greater safety
• Available in a 12-48V DC configuration
• Bright blue spot beam pattern projects onto the ground
• UV-resistant polycarbonate lens
• Rugged solid state LEDs can withstand shock & vibration
• Long-lasting LEDs mean never having to replace another bulb again! (Expected 20,000 life expectancy)
• Tough polycarbonate housing prevents rust & corrosion
• Universal pedestal mount
• Made in America
• 3 Month Limited Warranty

Installation:
• Suggested wiring is to run one wire from a ground to the negative spade terminal and connect a wire from the strobe light (if present) or an wire with switched ignition to the positive spade terminal. The current draw is minimal enough that most any wire should be able to handle extra current just fine. You can also connect the light to the reverse alarms positive wire if you would like it to only be on while in reverse or if you lack a strobe light. Ideally though, you would want it on constantly for pedestrial safety.
• Typically, the light is mounted to the overhead guard near the strobe or rear worklight.
• It is recommended to focus the spot about 7-8 feet from the rear of the forklift.

Part Numbers:
01291248
L0009740804
0009740804
YT550051276
SY83955
MBA000037093
MBA0000-37093
LI0009740804
HY4049504
CTA000037093
CTA0000-37093
CR340081
700BLU