Warning: This unit will require an electrician for installation. It will require a dedicated outlet or to be wired directly into a breaker panel. A professional electrician is highly recommended for installation due to risk of electrocution.
Additional note: Lithium charging ability is based on if the battery brand is supported by the manufacturer.
A Blue SB350 connector is included standard with this charger.
| Output Voltage | Output Amperage 8 Hour (Wet Cell) | Output Amperage 12 Hour (Wet Cell) | Output Amperage 10-14 Hour (Gel Cell) | Charging Current | Weight |
| 48v | 450-500Ah | 720-880Ah | 550-680Ah | 75A | ~77lbs. |
The GREEN6 power module based charger is a high-frequency, fully automatic charger for use with lead-acid or lithium batteries (for lithium batteries, charge rate information will be required) frequently found on forklifts, sweepers, scrubbers, & other industrial equipment. This battery charger is 90% high-energy efficiency rated.
• USA input voltage: 208-240 VAC single phase ONLY
• Programmable equalization scheduling available
• Suitable for flooded (Lead-Acid) batteries
• AGM, gel traction, or lithium batteries are also possible with programming (please contact us for these options)
• Charge cycle begins as low as 2-volts (some chargers refuse to start when the battery is low)
• Soft start charging cycle
• Fast charge capable
• Reverse polarity protection
• Wall-mountable
• CAN BUS communication available for lithium batteries
• Modular Design (allows for easy repairs)
• California Energy Commission Compliant
• 12 feet of DC output cable
• Dimensions: 13-3/4″ Wide x 8-5/8″ Deep x 26-1/4″ Tall
• Meets UL standards
• 3 Year Warranty
Reviews
There are no reviews yet.