The PSL is a waterproof programmable keypad that is an excellent way to control access to a vehicle. A code is required to enable the vehicle to crank. It is compatible with electric, gasoline, propane, and diesel lifts.

Great for forklifts, Cushman/Taylor Dunn carts, sweeper/scrubbers, Bobcat skid steers, telehandlers, scissor lifts, boom lifts JLG and Genie and golf carts like Textron or E-Z Go.

Features:
• Voltage Range – 12 to 90VDC.
• Code Entry – After installation, it requires entry of a two-digit user number and valid four-digit access code before the vehicle or equipment can be operated. User code can be reprogrammed.
• Automatic Shut-Off – Detects vehicle activity. If the vehicle has been inactive beyond a specified period of time, the switch will deactivate securing the vehicle. This feature is optional and can be activated or deactivated as desired.
• Maintenance Alert – Can accumulate vehicle usage time and provide audible and visible signals indicating when vehicle maintenance is due. After maintenance is performed, the cycle can be reset as desired. This feature is optional and can be activated or deactivated by supervisor.
• Accumulated Time – Can accumulate total vehicle usage time. This accumulated time can be accessed through the Supervisor Code. The supervisor’s access code can be changed using the factory programmed reset code.
• Installation – only requires 4-5 wires to connect.

PSL SYPSL1000 Operation Instructions

Specifications:
Case: ABS plastic, 5 3/16″ H x 2 13/16″ W x 1.0″ D. Two (2) 3/16″ mounting holes, 4 13/16″ center to center
Wire Lead Length: 9″
Keypad: Contacts internally sealed, moisture resistant
Voltage: Input range 12-90VDC
Current: Less than 30 mA with unit inactive; less than 90 mA with unit active.
Output: Contact rating up to 10A maximum through 48V. Maximum 1A contact rating above 48V. For loads greaterthan 10A use external relay.