• Standard Length Forks
• 3-Stage Mast
• Full Light & Safety Package
• Premium Tires
A number of important improvements have been made on the Z-Series:
- New Nissan K25 engines - Introduced for lower emissions and better reliability
- Transmission Suspension - Greatly reduces noise & vibrations (down to 79db)
- High Visibility Mast - Significantly better view through the mast due to hidden hoses and cylinders
- Better Steering - The rear axle has been designed allowing the wheels to turn up to 85 degrees
- Greater Lift Speed - Lift speed is notably quicker
- Hidden Tilt Cylinders - Frequently requested to avoid marring from chains, over-spray, & debris
- Better Brakes - The brake system has been moved to an oil-immersed design for better performance and higher reliability (up to 8000 hours)
- Superior Ergonomics - Seating, steering, & controls have all been redesigned to provide more comfortable & efficient operation
Tailift offers innovative design that integrates high end features & reliability without the high end price tag. They are durable enough to stand up to even the most challenging material handling applications. All Z-Series lifts include economical & eco-friendly high performance, fuel efficient, low emission engines! Z-Series trucks offer accessible maintenance, straightforward operation, enhanced operator ergonomics, and dedicated attention to detail with operator safety in mind. All Tailift forklifts have CE Certification, are produced in an ISO9001 accredited facility, and meet or exceed ANSI/ASME B56.1 standards. Tailift has built one of the safest and most efficient forklifts on the market without cutting corners.
Every Tailift Z forklift offers exceptional productivity, maximized visibility, and rugged construction. Backed by an expanding, Tailift Z trucks are ready for years of trouble free service.
STANDARD NISSAN K25 ENGINE
Classification: EPA Approved
Displacement: 2488cc (2.1 liter)
Rated Hp: 63hp @2700rpm
Max Torque: 139 lb-ft torque @1600rpm
Bore x Stroke: 89 x 83mm
This engine is 100% EPA approved for
use in the United States
NEW Wide View Mast
Using hidden hose design, rear mounted rollers,
and rear mounted cylinders, the new wide view
mast affords excellent visibility of the load and the
Electronic F/R Control Lever
The Forward/Reverse Control Lever is located just
below the steering wheel for quick and convenient
directional changes. Fingertip control of the
transmission reduces operator fatigue, and leads to
more efficient operation.
Light Control Lever
The Light Control Lever operates both the headlights
and directional turn signals within fingertip reach of
the steering wheel.
Multifunction Instrument Panel
The compact and centrally located Multifunction
Instrument Panel is easy to read and conveniently
positioned on the operator dash.
The panel provides the critical information required
to ensure operator safety, and indicate maintenance
Tilting Steering Column
Tilt Steering provides flexibility and operator
ergonomics, allowing for adjustments to create a
comfortable ride for operators of all builds.
DURABLE CONSTRUCTION & HIGH PERFORMANCE
Integrated Heavy Duty Overhead Guard
Not just a bolt-on afterthought, the Integrated Overhead Guard is
designed right into the chassis, providing optimal protection for
As an integral part of the truck, the overhead guard increases the
overall strength of the chassis for rugged durability, even when
operating on uneven or bumpy surfaces.
Hidden Tilt Cylinders
Standard on all models, Hidden Tilt Cylinders
enclose the tilt cylinder and reduce rod scoring
from dirt and grit, which can cause hydraulic
Tailift Transmissions are engineered using
advanced hydro-dynamics for precision,
performance and smoothness, improving operator
Z-Series trucks utilize a single-speed
transmission in all 1.5-3.0 ton models and a
two-speed forward/reverse transmission in all
4.0-5.0 ton models, ensuring enough power for even
the toughest applications.
Standard 6 Roller Fork Carriage
All Z-Series mast assemblies offer a 6-roller
carriage for smooth operation, and a standard 48-inch
(1220mm) high-load bracket for increased load control
and operator safety, even at full capacity.
Tight Steering Hydraulic Steer Axle
The Z-Series Hydraulic Steer Axle enables very
tight steering angles (up to 85 degrees) resulting in
great maneuverability and responsiveness. This
design delivers exceptional durability and reduced
maintenance when compared to traditional
EASE OF MAINTENANCE
• New 80 Degree Hood Opening
For greater head clearance.
• No-Bolt Floorboard
Quick, easy access to the engine compartment.
Also, you no longer need to remove the accelerator pedal.
• New no-tool radiator cover
Easily check coolant level.
• New removable side covers
Quick access to the side of the engine.
• Gas Filled Locking Hood Cylinder
With the compartment locked open, technicians can
quickly and safely access engine service points.
OPTIONS & ATTACHMENTS
Climate Controlled Cabin
|Load Center||24 Inches|
|Overall Width||45.7 Inches||A|
|Outside Width - Between Forks||40.3 Inches||B|
|Front Wheel Tread (from center of tires)||38.2 Inches||C|
|Width of Two Forks||9.4 Inches||D|
|Width of One Fork||4.7 Inches||E|
|Rear Wheel Tread||38.8 Inches||F|
|Minimum Outside Turning Radius||87.8 Inches||G|
|Maximum Overall Height||169.1 Inches||H|
|Maximum Fork Height (2-Stage Mast)||118.1 Inches||I|
|Height of Mast (Lowered)||81.7 Inches||J|
|Height of Load Backrest||48 Inches||L|
|Maximum Thickness of Fork||1.6 Inches||M|
|Length of Fork||42.0 Inches||N|
|Overall Length (to face of forks)||102.4 Inches||R|
|Ground Clearance - Lowest Point||4.3 Inches||m1|
|Ground Clearance - Center of Wheelbase||6.7 Inches||m2|
|Height of Overhead Guard||86.4 Inches||V|
|Front Wheel Size||7.00-12-12PR||AA|
|Rear Wheel Size||6.00-9-10PR||BB|
|Engine Model||Nissan K25|
Tailift ZFG25C ZFG25 EZG25C EFG25C
|SKU||Tailift Z-Series ZFG25C|